Name: 4/3E-HH slurry pump parts
SKU: 4/3E-HH

4/3E-HH — what pump is it and how to read its parts?

It belongs to HH High-head Slurry Pump. The table below lists all its parts from the factory parts book; the first items usually replaced are Expeller (EAM028) , LinerA07 (EH3110) , Throat BushA07 (EH3083) , Frame Plate LinerA07 (EH3041) .

To get a quote, just give us the pump model + part code + material + quantity, e.g. "4/3E-HH E4147 A05 2 pc”.
A nameplate or a photo of the old part also works: 13930163303 (WeChat same number) or email [email protected].
Confused by part names? See the glossary to understand “liner”, “expeller cover” and “A05”.

Same-series Comparison (HH High-head Slurry Pump) View all models of this type →

Within a series, larger suction/discharge sizes generally mean higher flow, head and max particle size. The table lists models of this series with collected clean-water performance (parts-only models and frame variants are in the “Same-series Models” tags at the page bottom), so you can move up or down the range; click “Details” for the full parts list.

models	Flow m³/h	Head m	Speed r/min	Rated Power kW	Particle Size mm	Action
1.5/1C-HH	16.2-34.2	25-92	1400-2200	30	15 mm	Details
3/2D-HH	68.4-136.8	25-87	850-1400	60	20 mm	Details
4/3E-HH	126-252	12-97	600-1400	120	28 mm	This page
6/4F-HH	324-720	30-118	600-1000	260	45 mm	Details
6/4S-HH	324-720	30-118	600-1000	560	45 mm	Details
8/6S-HH	468-1008	20-94	500-1000	560	60 mm	Details

Parameters are factory clean-water values; convert by slurry specific gravity and concentration for slurry duty.Final selection is subject to the factory selection confirmation sheet.

4/3E-HH Parts List (45 items)

The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.

Part Name	Part Code	Material / Spec	Unit Wt.	Unit
Oil-cup Seat	D138	20	0.29	pc
O-ring	F064	NBR	—	pc
O-ring	E109	NBR	1.88	pc
Shaft Sleeve	E075	3Cr13	10.44	pc
Locating Sleeve	EAM117	4Cr13	6.02	pc
Expeller	EAM028	HT200	8.2	pc
Expeller Cover	EAM029	HT200	17.6	pc
frame	E003M	HT200	154	pc
Lantern Ring	E063	1Cr18Ni9Ti	2.87	pc
Front Lantern Ring	E118	1Cr18Ni9Ti	4.08	pc
Packing Washer	E067	1Cr18Ni9Ti	0.96	pc
Split Gland	E044	HT200	3.8	pc
Pump CasingQT	EH3032	QT500-7	250	pc
Pump CoverQT	EH3013	QT500-7	246	pc
ImpellerA07	EH3147	KmTBCr15Mo3	126	pc
ImpellerA05	EH3147	KmTBCr26	126	pc
LinerA07	EH3110	KmTBCr15Mo3	180	pc
LinerA05	EH3110	KmTBCr26	180	pc
Throat BushA07	EH3083	KmTBCr15Mo3	105	pc
Throat BushA05	EH3083	KmTBCr26	105	pc
Frame Plate LinerA07	EH3041	KmTBCr15Mo3	92	pc
Frame Plate LinerA05	EH3041	KmTBCr26	92	pc
Stuffing Box	EH078	HT200	49	pc
Cover Stud	EH3015M	45	5.03	pc
O-ring	F109	NBR	—	pc
Suction Gasket	EH3060	Natural Rubber	—	pc
Discharge Gasket	EH3132L	Natural Rubber	—	pc
Seal Gasket	EH122	Natural Rubber	—	pc
Liner Gasket	F8124	Natural Rubber	—	pc
Frame-plate-liner Gasket	F122	Natural Rubber	—	pc
Bearing Body	E004M	HT200	58	pc
End Cover	E024	HT200	7	pc
Grease Guard Ring	E046	HT200	3.6	pc
Labyrinth Sleeve	E062	HT200	3.9	pc
Shaft	EAM073M	45	70.19	pc
BSW Round NutE061	SBB046-82	45	1.41	pc
Gland BoltM16X55	SBB047-82	45	0.27	pc
Lock WasherE011	SBB048-82	45	0.74	pc
Adjusting BoltM24X240	SBB049-82	45	1.51	pc
Locating Wedge150X35	SBB050-82	A3.A3F	0.24	pc
Casing BoltM24X260	SBB051-82	45	1.84	pc
Square-head ScrewM20X130	SBB054-82	45	0.66	pc
KeyB22X185	SBB063-82	45	0.89	pc
Bearing Assembly	EAM005M	—	—	pc
Throat Bush	DH3083	A05 / A49 / A07	—	pc

Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.

Ordering: send “pump model 4/3E-HH + part code + material" and we will confirm the quote; for non-listed non-standard parts, provide a drawing or photos and we will help identify them.

Quick Part Code Lookup

Part codes of this model grouped by part name; click any code to see the models it fits.

ExpellerEAM028 ImpellerA07EH3147 ImpellerA05EH3147 LinerA07EH3110 LinerA05EH3110 Liner GasketF8124 Throat BushA07EH3083 Throat BushA05EH3083 Throat BushDH3083 Frame Plate LinerA07EH3041 Frame Plate LinerA05EH3041 Frame-plate-liner GasketF122 Pump CasingQTEH3032 Casing BoltM24X260SBB051-82 Pump CoverQTEH3013 Cover StudEH3015M Expeller CoverEAM029 Stuffing BoxEH078 Split GlandE044 Gland BoltM16X55SBB047-82 Shaft SleeveE075 Bearing BodyE004M ShaftEAM073M Bearing AssemblyEAM005M frameE003M Lantern RingE063 Front Lantern RingE118 Labyrinth SleeveE062 Oil-cup SeatD138 O-ringF064 / E109 / F109 Locating SleeveEAM117 Packing WasherE067 Suction GasketEH3060 Discharge GasketEH3132L Seal GasketEH122 End CoverE024 Grease Guard RingE046 BSW Round NutE061SBB046-82 Lock WasherE011SBB048-82 Adjusting BoltM24X240SBB049-82 Locating Wedge150X35SBB050-82 Square-head ScrewM20X130SBB054-82 KeyB22X185SBB063-82

Performance Parameters

Pump Model	4/3E-HH
Category	Slurry Pumps
Series	HH High-head Slurry Pump
Rated Power	120 kW
Flow	126-252 m³/h (35-70 L/s)
Head	12-97 m
Speed	600-1400 r/min
Peak Efficiency	50 %
NPSH	2-5 m
Blades	5
Impeller Dia.	508 mm
Max. Particle Size	28 mm
Wet-end Material	High-chrome A05 (A07/A33/A49 optional)
Drive	CRZ, CV, DCZ, ZVZ
Shaft Seal	Gland packing, expeller seal, mechanical seal
Model Nomenclature	3/2D-HH: suction 3 in, discharge 2 in, D frame, HH seriesHigh-head Slurry Pumps.

AH, L, G Series Slurry Pump Manual

This model (Common to AH / HH / M / L / G Series) has a complete manual: structural drawings, assembly procedures, installation and alignment, operation and maintenance, parameter tables and troubleshooting.

Read Full Manual Download the original DOCX Request Stamped PDF

Same-series Models View all models of this type →

1.5/1C-HH 3/2D-HH 4/3X-HH 6/4F-HH 6/4X-HH 6/4S-HH 8/6S-HH 1.5/1CC-HH 3/2DD-HH 4/3EE-HH

4/3E-HH Slurry Pump Parts List (45 items / 41 part codes)