800WD (W/PW Series Sewage Pumps) Parts Listtotal 20 items, 20 part codes, including Impeller (800WD-001) , Pump Casing (800WD-003) , Pump Cover (800WD-004) , Gland (800WD-007) , Shaft Sleeve (800WD-005) , Shaft (800WD-002) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Sewage & Clean-water Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller (800WD-001) , Pump Casing (800WD-003) , Pump Cover (800WD-004) , Gland (800WD-007) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Pump Casing | 800WD-003 | HT200 | 4900 | pc |
| Pump Cover | 800WD-004 | HT200 | 1780 | pc |
| Impeller | 800WD-001 | HT200 | 650 | pc |
| Shaft | 800WD-002 | 45 | 282.44 | pc |
| Shaft Sleeve | 800WD-005 | HT200 | 34 | pc |
| Locating Sleeve A | 800WD-012 | 45 | 3.93 | pc |
| Bearing Body A | 800WD-008 | HT200 | 41 | pc |
| Bearing Body B | 800WD-009 | HT200 | 52 | pc |
| End Cover | 800WD-014 | HT150 | 1.6 | pc |
| Lantern Ring | 800WD-006 | HT200 | 2.5 | pc |
| Base | 800WD-020 | HT200 | 580 | pc |
| Suction Wear Ring | 800WD-021 | HT200 | 95 | pc |
| Gland | 800WD-007 | HT200 | 12 | pc |
| Seal-water Pipe | 800WD-022 | A3.A3F | 0.42 | pc |
| Round Nut | 800WD-015 | 45 | 4.12 | pc |
| Round Nut | 800WD-016 | 45 | 4.12 | pc |
| Oil Seal | 90X115X12 | NBR | — | pc |
| Splash Disc | 800WDL-19 | HT200 | — | pc |
| Oil Seal | 100X130X12 | NBR | — | pc |
| Elastic Ring | SBB00638 | Natural Rubber | — | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.