6PS (Mud / Sand / Ash Pumps) Parts Listtotal 33 items, 33 part codes, including Impeller 2# (6PS-02) , Liner Plate 2# (6PS-03) , Pump Casing 2# (6PS-01) , Gland (6PS-13) , Shaft Sleeve (6PS-11) , Shaft (6PS-05) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Mud / Rubber-lined / Sand & Ash Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller 2# (6PS-02) , Liner Plate 2# (6PS-03) , Pump Casing 2# (6PS-01) , Gland (6PS-13) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Pump Casing 2# | 6PS-01 | KmTBMn5W3 | 350 | pc |
| Water-inlet Chamber | 6PS-04 | HT200 | 292 | pc |
| Impeller 2# | 6PS-02 | KmTBMn5W3 | 113.5 | pc |
| Liner Plate 2# | 6PS-03 | KmTBMn5W3 | 60 | pc |
| Shaft | 6PS-05 | 45 | 139.17 | pc |
| Shaft Sleeve | 6PS-11 | HT200 | 7.8 | pc |
| Cylinder | 6PS-06 | HT200 | 102.5 | pc |
| Gland Cover | 6PS-19 | HT150 | 6 | pc |
| Front Bearing Cover | 6PS-20 | HT150 | 6.5 | pc |
| Rear Bearing Cover | 6PS-21 | HT150 | 5 | pc |
| Priming Sleeve | 6PS-10 | HT200 | 16.5 | pc |
| Telescopic Inner Sleeve | 6PS-23 | HT200 | 20 | pc |
| Telescopic Pipe Body | 6PS-24 | HT200 | 29 | pc |
| Telescopic-pipe Gland | 6PS-25 | HT150 | 8 | pc |
| Pump Base | 6PS-08 | HT150 | 107 | pc |
| Adjusting Bolt | 6PS-28 | A3.A3F | 1.18 | pc |
| Large Rocker Arm | 6PS-34 | HT200 | 14 | pc |
| Lifting Hook | 6PS-38 | A3.A3F | 0.6 | pc |
| Shaft-seal Body | 6PS-07 | HT150 | 40 | pc |
| Support | 6PS-18 | HT150 | 60 | pc |
| Gland | 6PS-13 | HT150 | 3.5 | pc |
| Packing Ring | 6PS-43 | HT150 | 2.6 | pc |
| Packing Compression Ring | 6PS-12 | HT150 | 1.2 | pc |
| Pump Pulley | 6PS-09 | HT200 | 156 | pc |
| Motor Pulley | C6PS-JS117-6 | HT200 | 188 | pc |
| Water-inlet Plug Cover | 6PS-22 | HT150 | 15.5 | pc |
| Cylinder Gland | 6PS-17 | HT150 | 11.6 | pc |
| Sand Disc | 6PS-16 | HT150 | 2 | pc |
| Long Stud A | 6PS-41 | A3.A3F | 2.59 | pc |
| Long Stud B | 6PS-42 | A3.A3F | 3.77 | pc |
| Impeller Nut | 6PS-26 | A3.A3F | 2.27 | pc |
| Locking Round Nut | 6PS-15 | A3.A3F | 2.91 | pc |
| Snap Ring | 6PS-14 | A3.A3F | 3.18 | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.